Metal Fabrications

450:004 ProTect Vinyl Sheen Primer/Finish

£42.00 / 5 Litres

Please select a colour or specify your own

At a glance

  • Vinyl resin technology
  • Proven adhesion to most substrates
  • Suitable for galvanised steel and plastisol coated cladding
  • Retains flexibility throughout coating life

Intended Uses

A single pack, vinyl sheen primer/finish, which provides outstanding adhesion to both clean steel, galvanised surfaces and existing prepared finishes. It provides a flexible finish with high levels of impact resistance. It is also the ideal product for refurbishing exterior cladding.

Details

Colour

Available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.

Gloss Level

Low sheen

Volume Solids

Nominally 32%, varying slightly with colour.

Recommended Film thickness

Typical dry film thickness when applied is 75 microns.

Theoretical Coverage

Approx 4.2 square metres per litre at 75 microns dft. NB. The practical coverage rate depends on many factors and will be less than the theoretical figure.

Method of Application

450:004 is best applied by airless and conventional spray.

Drying Time

Touch Dry …… 35 minutes.
Handle dry ….. 4 hours.
Full Cure …….. 7 days
Drying times are quoted at 20°C and will vary with actual conditions such as: film thickness, air movement, temperature and humidity.

Core colours for this product
Review all colours
Still not found your colour?

If you can't find the exact colour you're looking for then type your specific colour reference here.