360:000 CP07
Call for more details & pricing on
01246 857777
Please note – this product is being withdrawn in 2020, contact main office for further details on alternative products.
At a glance
- High performance C.V. two-pack gloss
- Can be applied by airless and conventional spray
- Suitable for commercial vehicle chassis and trailers
- Excellent resistance to most common chemicals
Intended Uses
CP07 is designed for the coating of commercial vehicles, trailers, chassis, agricultural implements and general machinery. It has excellent exterior durability and chemical resistance, and complies fully with the latest regulations, having a VOC below 420g/l. Mixing Ratio is 2:1
Details
Colour
Available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.
Gloss Level
Full gloss
Volume Solids
Nominally 54%, varying slightly with colour.
Recommended Film thickness
Typical dry film thickness when applied is 30 microns.
Theoretical Coverage
Approx 18 square metres per litre at 30 microns dft. NB. The practical coverage rate depends on many factors and will be less than the theoretical figure.
Method of Application
360:000 is best applied by conventional spray and airless spray (9 – 11 thou tip).
Drying Time
Touch Dry …… 40 – 60 minutes.
Handle dry ….. 3 – 4 hours.
Full Cure …….. 7 days
Drying times are quoted at 20°C and will vary with actual conditions such as: film thickness, air movement, temperature and humidity.
If you can't find the exact colour you're looking for then type your specific colour reference here.
Hardener
