300:300 QDPu Gloss Spraying Finish
£63.45 / 5 Litres
At a glance
- Polyurethane technology
- High gloss finish
- Suitable for commercial trailers, plant and machinery
- Good resistance to cleaning chemicals
Intended Uses
A single component topcoat, which is specially formulated to give the performance benefits of polyurethane alkyd resin technology. It offers high solids and is a VOC compliant topcoat as defined in EPA guidance notes such as PG6(34) and PG6(23).
Details
Colour
Available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.
Gloss Level
Full gloss
Volume Solids
Nominally 47%, varying slightly with colour.
Recommended Film thickness
Typical wet film thickness when applied is 8o microns.
Theoretical Coverage
Approx 12.7 square metres per litre at 80 microns wft. NB. The practical coverage rate depends on many factors and will be less than the theoretical figure.
Method of Application
300:300 is best applied by Air Assisted Airless Spray (9 – 11 thou tip) or conventional spray.
Drying Time
Touch Dry ……. 1½ – 2½ hours.
Handle Dry ….. 3 – 5 hours.
Full Cure ……… 7 days
Drying times are quoted at 20°C and will vary with actual conditions such as: film thickness, air movement, temperature and humidity.
If you can't find the exact colour you're looking for then type your specific colour reference here.
