210:032 QD Ultra High Solids Primer Finish
£162.75 / 20 Litres
At a glance
- Designed for high volume O.E.M. manufacturing
- Compliant to 0.37, ie users over 15 tonnes solvent per year
- Excellent durability
- Wide colour range
Please note that the minimum order per colour is 3 x 20 litres
Intended Uses
QD Ultra High Solids Primer Finish is one of our core products, sold in serious volumes across the UK. Primarily designed to be used as a ultra high solids one-coat finish for steel fabrication, which gives good exterior durability combined with resistance to certain chemicals. Suitable for users over 15 tonnes solvent per year. Typical applications are as a Container Paint for Skips and Rollonoffs, for Shipping Containers and Accommodation Units.
Details
Colour
Available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.
Gloss Level
Sheen
Volume Solids
Nominally 54%, varying slightly with colour.
Recommended Film thickness
Typical wet film thickness when applied as a finish is 185 microns (100 microns dft).
Theoretical Coverage
Approx 5.4 square metres per litre at 100 microns dft. NB. The practical coverage rate depends on many factors and will be less than the theoretical figure.
Method of Application
210:032 is best applied by Airless Spray or Air Assisted Airless Spray (15 – 19 thou tip)
Drying Time
Touch Dry .….45 minutes.
Handle Dry ….. 90 minutes.
Full Cure …. 7 days
Drying times are quoted at 20°C and will vary with actual conditions such as: film thickness, air movement, temperature and humidity.
If you can't find the exact colour you're looking for then type your specific colour reference here.
