Facilities Maintenance

101:302 2 Pack Epoxy Roadline

£55.10 / 4 Litre pack

Please select a colour or specify your own


At a glance

  • Long maintenance life
  • Withstands constant traffic
  • Resistant to oil, petrol and diesel
  • Wide range of colours


Intended Uses

101:302 is designed to be compatible with most of the surfaces that require linemarking paints to be applied. These include roads, car parks (concrete or tarmac/weathered blacktop), airfield runways etc. Typical other uses are brick, paving and factory floor demarcations.



Available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.

Gloss Level


Volume Solids

Nominally 65%, varying slightly with colour.

Recommended Film thickness

Typical dry film thickness when applied is 150 – 170 microns.

Theoretical Coverage

Approx 3.7 square metres per litre at 150 microns dft. NB. The practical coverage rate depends on many factors and will be less than the theoretical figure.

Method of Application

Lining machine, airless spray (tip size 13 thou), conventional spray, brush for small areas or lines.

Drying Time

Touch Dry ……. 1 hour.
Handle Dry ….. 6 hours.
Full Cure ……… 7 – 10 days dependent on temperature.
Drying times are quoted at 20°C and will vary with actual conditions such as: film thickness, air movement, temperature and humidity.

Core colours for this product
Review all colours
Still not found your colour?

If you can't find the exact colour you're looking for then type your specific colour reference here.

Base Hardener 101-302-8888