300:330 PU Gloss Brushing Finish
£86.80 / 5 Litres
At a glance
- High quality brushing gloss finish
- Excellent coverage
- Can be applied by brush or roller
- Suitable for narrow boats and the transport industry
Intended Uses
300:330 is a high quality finishing coat suitable for brush application onto canal boats, commercial vehicles and other articles where a high quality appearance is required.
Details
Colour
Available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.
Gloss Level
Full gloss
Volume Solids
Nominally 54%, varying slightly with colour.
Recommended Film thickness
Typical wet film thickness when applied is 75 microns.
Theoretical Coverage
Approx 13.3 square metres per litre at 75 microns wft. NB. The practical coverage rate depends on many factors and will be less than the theoretical figure.
Method of Application
300:330 is best applied by brush or roller (can also be sprayed).
Drying Time
Touch Dry ……. 3 – 4 hours.
Handle Dry ….. 4 – 6 hours.
Full Cure ……… 7 days
Drying times are quoted at 20°C and will vary with actual conditions such as: film thickness, air movement, temperature and humidity.
If you can't find the exact colour you're looking for then type your specific colour reference here.
