300:600 PU Gloss Floorpaint
£34.45 / 5 Litres
At a glance
- Polyurethane resin
- Easy brush or roller application
- Ideal for general maintenance
- Safety areas and pedestrian walkways
A relatively fast drying floor paint that dries to a hard durable finish. Gives good resistance to splashing with petrol, lubricating oils, mild alkalis, dilute mineral acids (including battery acids), grease and water. Gives a smooth finish with a high sheen.
Available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.
Nominally 55%, varying slightly with colour.
Recommended Film thickness
Typical dry film thickness when applied is 50 microns.
Approx 8 square metres per litre at 50 microns dft. NB. The practical coverage rate depends on many factors and will be less than the theoretical figure.
Method of Application
300:600 is best applied by brush or roller.
Touch Dry ……………… 3 hours.
Dry for foot traffic ….. Overnight.
Full Cure ……………….. 7 days
Drying times are quoted at 20°C and will vary with actual conditions such as: film thickness, air movement, temperature and humidity.
If you can't find the exact colour you're looking for then type your specific colour reference here.