400:300 Chlor Rubber Brushing Finish
£55.10 / 5 Litres
At a glance
- Chlorinated rubber brushing finish
- Resistant to acids and alkalis
- Best suited to areas of high humidity and moisture saturation
Intended Uses
Chlorinated Rubber products have outstanding protective qualities, waterproofing and excellent resistance to attack from seawater acids, alkalis and many chemicals. The resultant finish yields an off gloss (sheen) appearance.
Details
Colour
Available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.
Gloss Level
Sheen
Volume Solids
Nominally 40%, varying slightly with colour.
Recommended Film thickness
Typical dry film thickness when applied is 50 microns.
Theoretical Coverage
Approx 8 square metres per litre at 50 microns dft. NB. The practical coverage rate depends on many factors and will be less than the theoretical figure.
Method of Application
400:300 is best applied by brush or roller.
Drying Time
Touch Dry …… 30 minutes.
Handle dry ….. Overnight.
Full Cure …….. 7 days
Drying times are quoted at 20°C and will vary with actual conditions such as: film thickness, air movement, temperature and humidity.
If you can't find the exact colour you're looking for then type your specific colour reference here.
