203:042 QD Sheen Primer Finish
£40.75 / 5 Litres
At a glance
- Quality sheen finish
- Fast drying
- Wide colour range
- Anti-corrosion protection
Intended Uses
An economical one coat primer/finish, with a higher sheen level than usual for the customer who wants their article to look good without costing the earth. Compares well to other brands such as Hammerite Smooth.
Details
Colour
Available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.
Gloss Level
High sheen
Volume Solids
Nominally 42%, varying slightly with colour.
Recommended Film thickness
Typical dry film thickness when applied is 85 microns.
Theoretical Coverage
Approx 5 square metres per litre at 85 microns dft. NB. The practical coverage rate depends on many factors and will be less than the theoretical figure.
Method of Application
Application by Airless Spray or Air Assisted Airless Spray (13 – 15 thou tip) or conventional spray.
Drying Time
Touch Dry ……..15 minutes.
Handle Dry ….. 2 – 4 hours.
Full Cure ……… 7 days
Drying times are quoted at 20°C and will vary with actual conditions such as: film thickness, air movement, temperature and humidity.
If you can't find the exact colour you're looking for then type your specific colour reference here.
