At a glance

• Durable epoxy ester coating
• Suitable for airless spray and lining machines
• Touch dry in 5 minutes, light traffic in 20 minutes. 75mm line upto 950m per 20l can
• Meets BS1436 specifications

Intended Uses

Market leading line marking solution, displays superior durability over chlorinated rubber systems. Use on Roads, Car parks (concrete or tarmac/weathered blacktop), Airfield runways, Brick and paving.  Typical applications include warehouses, factories, demarcation of pedestrian areas, and steps.

Details

Colour

Available in White, Black or Yellow at this price. A limited colour range is also available subject to an additional surcharge.

Gloss Level

Matt

Volume Solids

Nominally 52%, varying slightly with colour.

Recommended Film thickness

Typical wet film thickness when applied as a finish is 288 microns (150 microns dft).

Theoretical Coverage

Approx 3.5 square metres per litre. NB. The practical coverage rate depends on many factors and will be less than the theoretical figure. For a 75mm width line, this is around 47m

Method of Application

160:006 can be applied by :

Lining machine, airless spray (tip size 11-13 thou), conventional spray with pressure pot (tip size 2.2mm), brush or roller.

Drying Time

Touch Dry .….10 minutes.

No Pick Up …. 15 minutes
Through Dry for traffic….. under 2  hours.
Full Cure …. 5-7 days
Drying times are quoted at 20°C and will vary with actual conditions such as: film thickness, air movement, temperature and humidity. Although this product has fast drying properties, full cure/resistance and film strength is only achieved after 5-7 days.