Skips and Containers

203:042 QD Sheen Primer Finish

£40.75 / 5 Litres

Please select a colour or specify your own

At a glance

  • Quality sheen finish
  • Fast drying
  • Wide colour range
  • Anti-corrosion protection

Intended Uses

An economical one coat primer/finish, with a higher sheen level than usual for the customer who wants their article to look good without costing the earth. Compares well to other brands such as Hammerite Smooth.



Available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.

Gloss Level

High sheen

Volume Solids

Nominally 42%, varying slightly with colour.

Recommended Film thickness

Typical dry film thickness when applied is 85 microns.

Theoretical Coverage

Approx 5 square metres per litre at 85 microns dft. NB. The practical coverage rate depends on many factors and will be less than the theoretical figure.

Method of Application

Application by Airless Spray or Air Assisted Airless Spray (13 – 15 thou tip) or conventional spray.

Drying Time

Touch Dry ……..15 minutes.
Handle Dry ….. 2 – 4 hours.
Full Cure ……… 7 days
Drying times are quoted at 20°C and will vary with actual conditions such as: film thickness, air movement, temperature and humidity.


Core colours for this product
Review all colours
Still not found your colour?

If you can't find the exact colour you're looking for then type your specific colour reference here.