600:510 ST1Kgrip
£50.05 / 5 Litres
At a glance
- Waterborne credentials
- Slip resistant properties
- Fast drying
- Quick return to service
Intended Uses
ST1Kgrip is designed to be compatible with most of the surfaces that require linemarking paints to be applied. These include roads, car parks (concrete or tarmac/weathered blacktop), airfield runways etc. Typical other uses are brick, paving, factory floor demarcations and wood.
Details
Colour
Available in a wide range of colours including most British Standards, RAL and special colours to customer requirements.
Gloss Level
Matt
Volume Solids
Nominally 50%, varying slightly with colour.
Theoretical Coverage
Approx 3 square metres per kilo. NB. The practical coverage rate depends on many factors and will be less than the theoretical figure.
Method of Application
600:510 is best applied by lining machine, airless spray (tip size 35-41 thou) with all filters removed, conventional spray with pressure pot (tip size 2.2mm), brush or roller.
Drying Time
Touch Dry …………………… 15 minutes.
Rain Resistant …………….. 40 minutes.
Through Dry for traffic …. 2 hours
Drying times are quoted at 20°C and will vary with actual conditions such as: film thickness, air movement, temperature and humidity.
If you can't find the exact colour you're looking for then type your specific colour reference here.
