Steel has many positive attributes but it is also renowned for its tendency to corrode over time. This is not only an esthetical problem, but can dramatically affect the structure itself, creating damaging consequences and making it unsafe. So […]
Paint is the most commonly used material to protect steel and in practice the term “paint” covers a wide range of materials with very different properties. Modern resins provide a high level of protection, but only when careful attention has […]
Floors are often difficult surfaces to paint due to their wide variation and composition, surface contamination, surface treatments and expected end use. To that end, Pronto are pleased to offer guidance notes designed to help the job go well. Click […]
Background Pigment Yellow 34 (Lead sulfochromate yellow) and Pigment Red 104 (lead chromate molybdate sulfate red) have been used in some industrial paints for many years. The introduction of the REACH regulation by the EU raised concerns whether their use […]
Dear customer, You may have heard in the media or via other channels that the European Chemicals Agency (ECHA) has opened a public consultation on the proposal from the French Agency for Food, Environmental and Occupational Health & Safety (ANSES) […]
We at Pronto Industrial Paints Ltd are active members of the British Coatings Federation and signatories to their ‘Coatings Care’ programme. We have fully documented QA procedures which guarantee product consistency, that include the full traceability of raw materials, intermediates […]
Recommended system: Minimum D.F.T. 75 microns Tip size if spraying: 15 / 17 thou 60° Surface preparation: Degrease new bright galvanising and apply 028:000 T-Wash. When surface has turned black rinse with clean water. Check any areas that remain bright […]
Pronto Industrial Paints were contacted by Strata Products to help refurbish an old abandoned/derelict factory. The factory itself was built in the late 60’s and used by a wood products company, this was closed down in the recession of the […]
CE Marking As part of the requirement of the Construction Products Regulation (CPR) (305/2011EC) products that comply with this regulation have to carry the CE mark either on the product and/or on the attached information that accompanies the product. To […]