This is the list of our most popular products that are now available online. We also toll manufacture a wide range of coatings for industrial partners, so if you don’t see what you need it’s worth getting in touch.
QD Thinners for thinning our range of QD products
Suitable for thinning our range of 2 Pack Epoxy products
suitable for thinning 350:000 and 350:100 only
Suitable for cleaning out equipment after use, not for thinning any paint products with.
Low Odour Thinners for thinning 340:105 and 340:205
Suitable for thinning 350:510 only.
Slow Thinners for thinning our range of QD products
- Solution of phosphoric acid and copper salt.
- For the pre-treatment of galvanised steel to improve the adhesion of subsequent coating system
- Complies with the BR specification for T-Wash.
Suitable for thinning 203:406
Special Thinners for thinning our range of linemarking products.
Epoxy CV Thinners for thinning 102:005
- Quick Drying
- Can be overcoated with 1K or 2K finishes
- Aids adhesion on difficult to prepare substrates
- No waste ready for use
- Robust general use industrial epoxy primer
- Overcoatable with 2K epoxy or 2K polyurethane finishes
- Medium solids
- Excellent anti-corrosive properties
- Use as a full system with 100:006
- Hard wearing abrasion resistant finish
- Excellent chemical resistance
- Conventional spray or brush / roller
- Robust general use industrial epoxy primer
- Overcoatable with 2K epoxy or 2K polyurethane finishes
- Medium solids, high sag resistance
- Excellent anti-corrosive properties
- Hard wearing abrasion resistant floor paint
- Excellent chemical resistance
- Conventional spray or brush / roller
- Suitable for medium to heavy traffic
- Long maintenance life
- Withstands constant traffic
- Resistant to oil, petrol and diesel
- Wide range of colours
- Excellent wet edge properties
- Achieves good gloss holdout
- Ideal for commercial vehicle chassis
- Anti-corrosive pigmentation
- Suitable as a build coat or finish
- Provides excellent protection
- Resistance to abrasion, chemicals, solvents
- Part of C4 and C5 systems under ISO 12944
- Can be used as a repair process on galvanised steel
- Airless spray application
- Excellent anti-corrosion protection
- Resistant to wear and abrasion
- Quick drying
- Protection for steel substrates
- Ideal for repairs to galvanised substrates
- Available in matt grey or silver
- Durable epoxy ester coating
- Suitable for airless spray and lining machines
- Touch dry in 5 minutes, light traffic in 20 minutes. 75mm line upto 950m per 20l can
- Meets BS1436 specifications
- Durable epoxy ester coating
- Suitable for airless spray and lining machines
- Touch dry in 5 minutes, light traffic in 20 minutes. 75mm line upto 950m per 20l can
- Meets BS1436 specifications
- Fast drying general purpose alkyd primer
- Overcoatable with a range of Q.D. finishes
- Excellent protection of bare steel and fabrications
- Quality blast primer
- Fast drying general purpose primer
- Overcoatable with a range of Q.D. finishes
- Excellent protection of bare steel and fabrications
- 50×20 of Hollybush Green BS14C39
- Fast drying general purpose primer
- Overcoatable with a range of Q.D. finishes
- Excellent protection of bare steel and fabrications
- Ideal to go under 204:500 QD Heat Resistant Topcoat
- High gloss finish
- Quick drying
- Fast handling properties
- Resistant to mild chemicals
- Fast drying
- Sheen finish
- Ideal for pre-painted refurbishment
- Excellent recoating properties
- Quality high sheen finish
- Fast drying
- Wide colour range
- Anti-corrosion protection
- Fast drying
- Sheen finish
- Ideal for pre-painted refurbishment
- Excellent recoating properties
- Coating manufactured for the waste industry
- Ideal for refurbishing skips and containers
- Glossy finish
- Fast drying
- High opacity for easy brush application
- Coating manufactured for general fabrications
- Ideal for refurbishing skips and containers
- Glossy fast drying finish
- Quality single pack primer
- General use for commercial vehicles
- Conventional spray
- Can be overcoated with 1K & 2K topcoats
- High sag resistance
- Good wet edge time
- Anti-corrosive
- Airless application
- High gloss finish
- Quick drying
- Fast handling properties
- Resistant to mild chemicals
- Fast drying
- Sheen finish
- Ideal for pre-painted refurbishment
- Excellent recoating properties
- Compliant high sheen primer / finish
- Suitable for sites using 5 – 15 tonnes solvent per year
- High build
- Anti-corrosive pigmentation
- Ideal for site cabin industry
- Quick drying mid sheen finish
- Airless spray application
- No priming required
- Semi-matt finish
- Suitable for structural steelwork
- High build
- Airless spray application
- High Solids for applications PG6/23
- Suitable for users between 5-15 tonnes of solvent a year
- Ideal for Structural Steel
- Ease of application
- Designed for high volume O.E.M. manufacturing
- Compliant to 0.37, ie users over 15 tonnes solvent per year
- Excellent durability
- Wide colour range
- Designed for high volume O.E.M. manufacturing
- Compliant to 0.37, ie users over 15 tonnes solvent per year
- Excellent durability
- Wide colour range
- Polyurethane technology
- High gloss finish
- Suitable for commercial trailers, plant and machinery
- Good resistance to cleaning chemicals
- High quality brushing gloss finish
- Excellent coverage
- Can be applied by roller or brush
- Suitable for narrow boats and the transport industry
- Polyurethane resin
- Easy brush or roller application
- Ideal for general maintenance
- Safety areas and pedestrian walkways
- Alkyd based Jet Black gloss finish
- Splash resistant to petrol and diesel
- Brush or spray application
- Recoatable after overnight drying
- General purpose alkyd gloss
- Suitable for all agricultural and plant refurbishment
- Excellent gloss retention
- Brush or roller application
- Brush application
- Used as a paint system under 308:200 and 300:330
- Applied over bare steel or prepared existing paintwork
- Excellent coverage
- General purpose alkyd undercoat
- Suitable for all agricultural and plant refurbishment
- Used as a paint system under 308:200 and 300:330
- Brush or roller application
- Tower Paint Alkyd Primer
- Conforms to EA Technology Specifications
- Tower Paint Alkyd Topcoat
- Conforms to EA Technology Specifications
- Grey-Green MIO colour
- Low odour coating for spray application
- Fast drying xylene free
- Used for site cabins / modular buildings industry
- Low sheen finish
- Low odour coating for brushing
- High opacity
- Anti-corrosion
- Ideal for cladding and container refurbishment
- Tough polyurethane finish
- High performance topcoat
- Fast drying
- Good gloss retention
- Tough polyurethane finish
- High performance floor coat
- Fast drying
- Good gloss retention
- Out performs 1K finishes
- Alternative when isocyanates cannot be used
- Superior gloss retention when compared to epoxy finishes
- Fast drying slip resistant Floorcoat
- Overnight return to service for traffic
- Isocyanate free and suitable for fork lift areas
- SRV is 86 (Dry), extremely low slip potential
- No primer required
- Glossy finish
- Suitable for plant, machinery and agricultural applications
- Excellent corrosion resistance over bare metal
- Chlorinated rubber floorpaint
- Resistant to acids and alkalis
- Best suited to areas of high humidity and moisture saturation
- Chlorinated rubber brushing finish
- Resistant to acids and alkalis
- Best suited to areas of high humidity and moisture saturation
- Chlorinated rubber line marking paint
- Very fast drying – Car parks back in service very quickly
- Available to buy online in White, Yellow and Black
- Suitable for concrete / paving / tarmac
- Vinyl resin technology
- Proven adhesion to most substrates
- Suitable for primed galvanised steel and plastisol coated cladding
- Retains flexibility throughout coating life
- Vinyl resin technology
- Proven adhesion to most substrates
- Suitable for galvanised steel and plastisol coated cladding
- Retains flexibility throughout coating life
- Vinyl micaceous iron oxide
- Can be used with ProTect range for increased corrosion resistance
- Ideal for rural and coastal applications
- Brush or spray
- Vinyl based Primer
- conforms to National Grid Specification TS 3.04.24
- Vinyl Based Topcoat
- conforms to National Grid Specification TS 3.04.24
- Temporary protection of steel stock
- For use on automatic plant or airless spray
- Excellent overcoating properties
- Touch dry in 10-15 minutes
- Suitable for modular buildings / site buildings
- Airless spray application
- Anti-corrosion pigmentation
- Fast drying water based formulation
- Waterborne coating with proven adhesion to a wide range of substrates
- Non-toxic environmentally friendly coating
- Fast drying
- Excellent coverage
- Waterborne credentials
- Slip resistant properties
- Fast drying
- Quick return to service
- Waterborne coating suitable for new tarmac
- Fast drying
- Rain Resistant after 40 minutes
- Good adhesion to existing single pack line marking
Used in conjunction with our floorcoat range to improve slip resistance
Empty 5L UN rated can with ringlatch and lid
Our A2 colour chart showing BS 4800, BS 381C and RAL ranges
- 400ml Aerosol
- for touching up and repairing damaged galvanised steel sections
- specially formulated to resemble newly galvanised steel
- ideal for offering corrosion resistance on cut ends, welding joints etc.
- 400ml Aerosol
- 210:032 product for touching up skips and containers
- Hide damage from hooks and chains when loading/unloading
Floors are often difficult surfaces to paint due to their wide variation and composition, surface contamination, surface treatments and expected end use.
Simply register on our site and get a free download of our guidance notes that will help you get the best out of your floorpaint.
48 page booklet showing our popular products in a wide range of sectors
4 page booklet with our popular options, free to download
4 page booklet with our popular options, free to download
4 page booklet with our popular options, free to download
4 page booklet with our popular options, free to download
6 page booklet with our popular options, free to download
4 page booklet with our popular options, free to download
2 page booklet with our popular options, free to download
4 page booklet with our popular options, free to download
4 page booklet with our popular options, free to download
Floors are often difficult surfaces to paint due to their wide variation and composition, surface contamination, surface treatments and expected end use.
Simply register on our site and get a free download of our guidance notes that will help you get the best out of your floorpaint.
T-Wash
Adhesion Promoter
2 Pack Epoxy Primer
2 Pack Epoxy Gloss Finish
2 Pack Epoxy Floorcoat
2 Pack Epoxy Linemarking Paint
2 Pack Epoxy CV Primer
Epoxy Ester Linemarking
QD Industrial Primer
QD Gloss Spraying Finish
High Build One Coat Primer/Finish
QD Glossy One Coat Finish
QD Gloss Brushing Finish
QD Universal Transport Primer
Trailerprime
QD HB One Coat Primer/Finish
QD HB AC Compliant Primer/Finish
QD AC HB Sheen OCF
Compliant Matt Primer/Finish
58% Solids QD Primer
FA.37 Compliant High Solids Primer/Finish
QDPu Gloss Spraying Finish
Pu Gloss Brushing Finish
Pu Gloss Floorpaint
Agrisheen Gloss Finish
Air Drying Primer
Air Drying Undercoat
Tower Paint Alkyd Primer
Tower Paint Alkyd MIO Topcoat
Low Odour Spraying One Coat Primer/Finish
Low Odour Brushing One Coat Primer/Finish
2 Pack Pu Floorpaint
2 Pack Iso-Free Finish
ProCure 15
2 Pack Direct to Metal
Chlor Rubber Brushing Finish
Chlor Rubber Linemarking Paint
ProTect Vinyl Sheen Primer/Finish
Vinyl Tower MIO Primer
Vinyl Tower MIO Topcoat
Waterbased OCF
ST1K Plus
ST1K Waterbased Linemarking
Aggregate